How to Jump a Car Battery

It’s the full swing of winter, and the frigid temperatures have now hit us. With winter brings a new set of difficulties for our beloved cars. Nobody in Pawtucket, Cranston, or East Providence likes to go out in the freezing cold, especially since there’s a higher potential for a dead battery. You hop in the car, turn the key, there’s a brief turnover sound, and then nothing. You turn the key a second time, and maybe there’s just a click.

Now what do you do? You have to get to work to jump-start your car battery, but you’ve never jumped a car in your life. Fear not—the process is very easy. Learn the step-by-step process you need to know for how to jump a car battery and get yourself up and running once more in no time at all.

The steps to how to jump a car battery are a basic process of connecting port one to port two. They’re even, generally, color-coded for you. All it takes is a little caution and care, and it’s a snap. Let’s look at each step-in detail.

Step One: Acquire Jumper Cables and a Second Car.

You’ll need jumper cables to jump-start your battery. While there may be “life hacks” out there stating otherwise, be smart and use real cables. Trying to use some other kind of wiring puts your life in danger.

You’ll also need a second working car with a good battery. This will be the source of the power you need.

Step Two: Position Your Cars.

Position your cars nose-to-nose if possible, put them in park, and turn them off. Then, open the hoods. Make sure your parking brakes are engaged. You want them nose to nose to make it easy for the cables to reach.

Step Three: Connect Positive Terminals.

Connect the red clip on your jumper cables to the positive terminal on your battery, which will usually have a red cap or be marked with a “+” or the letters “POS.” Alternately, it will be bigger than the negative terminal. If it’s capped, make sure to remove the cap, so the metal on the clips touches the metal on the battery.

Then, connect the other red clip to the positive terminal on the other battery. Once this is done, avoid having either clip touch its black counterpart.

Step Four: Connect Negative Terminals.

Next, repeat the process, connecting each black clip to the negative terminal on the batteries. It’s important to connect both positive terminals, then both negative terminals, and be careful not to cross-wire the connections. Otherwise, you could seriously damage one or both batteries.

Step Five: Start the Working Vehicle.

Start up the car with the good battery and let it run for a couple of minutes. This will transfer battery power from that vehicle to yours.

Step Six: Start Your Car.

Crank the engine on your car and it should fire up! If it doesn’t, your battery might need further maintenance or a replacement.

Get a New Battery at Stateline Nissan

Even if your car fires right up after a jump, you should still have your battery checked by a professional and possibly replaced. A dead car battery can be frustrating, to say the least, so being able to find reliable car battery service in East Providence, Cranston, and Pawtucket is important. At Stateline Nissan, our team of qualified technicians offers quick and professional battery repair, so you can get back behind the wheel.

Schedule your battery repair now!

Location

845 Taunton Ave, East Providence, RI 02914

Get Directions

Hours

M: 7:30AM - 6:00PM

Tu: 7:30AM - 6:00PM

W: 7:30AM - 6:00PM

Th: 7:30AM - 6:00PM

F: 7:30AM - 6:00PM

Sa: 7:30AM - 4:00PM

Su: Closed